How To Increase The Output Of Wood Pellet Machine?
The new mold needs to be washed. The mold hole of the new mold is not smooth enough. If it is not ground, the output of the pellet machine will be reduced.
The moisture content of the material should be controlled well. The moisture content of the biomass pellet fuel material should be controlled at about 15%. Otherwise, not only the output is low, but also the quality of the finished pellets is poor.
The gap between the mold and the pressing wheel should be adjusted well. This affects the size of the pressure, which should not be too large or too small. Adjust a suitable value according to your own materials to achieve high and stable production.
| Model | Capacity | Power | Dimensions | Weight |
| MK-250 | 100-200kg/h | 15kw | 1120*440*1060mm | 400kg |
| MK-300 | 200-300kg/h | 22kw | 1280*560*1220mm | 700kg |
| MK-350 | 300-400kg/h | 30kw | 1300*600*1250mm | 800kg |
| MK-400 | 400-600kg/h | 37kw | 1390*650*1290mm | 1000kg |
| MK450 | 600-800kg/h | 45kw | 1620*700*1600mm | 1500kg |
Replace the old mold in time. The mold roller is a consumable part of the pellet machine. The performance will decline over time. Replace it in time if it doesn't work.
When feeding the wood pellet machine, try to keep it even, so that the machine can run at a high speed and the pellet machine will make pellets more smoothly.
From the perspective of the structure of the pelletizing equipment, users should select a mold with a suitable compression ratio according to different materials to avoid low output and no material discharge.
From the perspective of the equipment parameter setting, the gap between the template and the pressing wheel of the wood chip pellet machine is very critical. A reasonable compression gap can improve the forming rate of the wood chip pellet machine and reduce the wear of the mold and the pressing wheel.
