Products
Charcoal Carbonization Stove
The carbon rods produced by the suspended carbonization furnace are of good quality and very resistant to burning. It is a very reliable equipment.
Features
Hanging Carbonization Furnace Overview:
The smokeless carbonization process of the hoisting carbonization furnace is divided into four stages: drying, pre-carbonization, carbonization and calcination. The first two stages require firewood in the furnace to provide heat to ensure the temperature rises. They are endothermic reaction stages. The third stage releases a large amount of reaction heat. It is an exothermic reaction stage and produces a large amount of combustible gas. The fourth stage relies on the high-temperature flue gas generated in the third stage. Heat is supplied for calcination.The three inner tanks are alternately carbonized and lifted off for cooling, continuous production, and increased production capacity; external heating and anoxic carbonization shorten the production cycle; carbonized flue gas is recycled, no emissions and no pollution; the quality of the charcoal is good, the temperature of the charcoal is high, and the energy High conversion and utilization rate, low energy consumption.It is a rare and good equipment.
Charcoal production furnace

| Model Name | Capacity | Mainly Included Parts | Shipping |
| 1 | 2-3ton/24hour | 1outer stove+3 inner pot | LCL |
| 2 | 5-6ton/24hour | 2outer stove+6 inner pot | FCL 1*20GP |
| 3 | 7-9ton/24hour | 3outer stove+9 inner pot | FCL 1*40GP |
| 4 | 10-12ton/24hour | 4outer stove+12inner pot | FCL 1*40GP |
Wood Carbonization Stove :
The complete design scheme of the hoisting carbonization furnace meets the following principles:
(1) The operation mode adopts continuous operation, the carbonization temperature is controllable, the heat transfer is uniform, and the quality of the carbon produced is stable;
(2) High char yield;
(3) The by-products are recycled and have no pollution to the environment.
carbonization oven

Charring furnace advantages:
During the carbonization process of the carbonization furnace, a large amount of flammable gas will be produced. These gases will not be used up after full carbonization. Then we can lead these flammable gases through pipelines to the bottom of another carbonization furnace for combustion and carbonization to raise the temperature. In this way, we do not need to ignite frequently, but can also achieve continuous production. We can control the size of the fire, the temperature and the direction of the gas through the control of the valve.
Customer visit:

Hot Tags: charcoal carbonization stove, China charcoal carbonization stove manufacturers, suppliers, factory, carbonization workshop, Rice husk carbonization furnace, carbonization oven, Bamboo Powder Charcoal Furnace, carbonization washer, carbonization fair
You Might Also Like
Send Inquiry




