What Are The Advantages Of The Biomass Pellet Machine?

Advantages of the biomass pellet machine:
1: There is an additional part of the flower arrow shaft on the main shaft, which is more stable and the pellets are more uniform.
2: The mold is installed vertically, the machine is easy to fix and runs smoothly.
3: The mold is vertical, the feed is vertical, it does not arch, and it is easy to dissipate heat.
4: The mold has two layers, which can be used up and down to reduce costs and increase efficiency.
5: The pressure wheel rotates to generate centrifugal force on the material, which is evenly distributed around.
6: There is an automatic lubrication control system to prompt when to add oil.
Advantage 1: The main configuration of the pellet machine is mainly motor, reducer, bearing, and electronic components.
Advantage 2: The pressure roller adopts a new type of closed pressure roller without lock nut, and dust is not easy to enter the bearing chamber, which effectively protects the bearing, greatly increases the life of the bearing, and reduces the maintenance cost and accessories cost.

Advantage 3: The reduction box and the main shaft bearing chamber are lubricated with circulating gear oil, and a water-cooled oil temperature heat dissipation device is added to reduce the oil temperature in the reduction box and protect the bearing.
Advantage 4: The equipment has a high degree of automation, electronic control design, independent research and development of mold temperature detection, bearing room temperature detection, oil temperature detection, truly realizing full automation and saving human resources.
Advantage 5: The shell weighs 2.5t, which increases the stability of the machine. The shell is forged, with good heat dissipation and low thermal deformation.