How To Adjust The Parameters Of The Wood Pellet Machine?

Compression ratio adjustment: The compression ratio directly affects the density and hardness of the pellets. Properly increasing the compression ratio can make the pellets more compact, but too large a compression ratio will cause the pellets to be too hard, affecting the combustion efficiency. Therefore, it is necessary to adjust to the optimal compression ratio range according to the type of raw materials and pellet requirements.
Speed ​​control: The speed of the pellet machine determines the residence time and force of the raw materials in the machine. Reasonable control of the speed can ensure that the raw materials are fully crushed and evenly mixed, thereby improving the uniformity and quality of the pellets.
Mold selection: The aperture and shape of the mold have an important influence on the molding of the pellets. According to the specification requirements of the pellets, selecting a suitable mold can ensure that the size and shape of the pellets meet the standards.

Temperature control: During the pellet molding process, appropriate temperature helps soften and bond the raw materials. Therefore, it is necessary to monitor and adjust the heating temperature of the pellet machine to ensure that it is within the appropriate range to improve the molding quality and strength of the pellets.
Feed speed: Reasonably control the feed speed to avoid blockage or poor molding caused by too fast or too slow. According to the production capacity of the pellet machine and the characteristics of the raw materials, adjusting to the optimal feed rate can ensure production continuity and pellet quality.