Tips For Adjusting Parameters Of Biofuel Pellet Machine
Preparation before adjustment
Before you start adjusting the parameters of the biofuel pellet machine, you need to clean and maintain the equipment to ensure that the equipment is in good operating condition.
2. Adjust the pellet machine pressure
The pellet machine pressure is an important parameter that affects the quality of the bio-pellet machine. Proper adjustment of the pellet machine pressure can ensure that the pellet machine produces high-quality pellets and ensures the long-term stable operation of the pellet machine. When adjusting, increase the pressure appropriately, but also need to be careful not to overdo it to avoid problems such as burning and jamming.
3. Adjust the pellet machine speed
The pellet machine speed will affect the output and pellet quality of the pellet machine. Generally speaking, a lower speed can improve the pellet quality, but it will reduce production efficiency; a higher speed can improve production efficiency, but the pellet quality may decrease. Therefore, it is necessary to adjust the speed according to the actual situation to balance the pellet machine output and pellet quality.

| Model | Capacity | Power | Dimensions |
| MK-250 | 100-200kg/h | 15kw | 1120*440*1060mm |
| MK-300 | 200-300kg/h | 22kw | 1280*560*1220mm |
| MK-350 | 300-400kg/h | 30kw | 1300*600*1250mm |
| MK-400 | 400-600kg/h | 37kw | 1390*650*1290mm |
| MK450 | 600-800kg/h | 45kw | 1620*700*1600mm |
4. Adjust the pellet machine feed speed
The feed speed directly affects the pellet machine output and pellet quality. If the feed speed is too fast, the pellet machine will be blocked and the pellet quality will be reduced. If the feed speed is too slow, the output of the pellet machine will be affected. Therefore, when adjusting the feed speed, it is necessary to make a comprehensive consideration based on the actual production capacity of the pellet machine and the pellet quality requirements, and adjust the feed speed appropriately.
V. Precautions
1. When adjusting the parameters of the pellet machine, it is necessary to operate according to the equipment manual to avoid damage to the equipment due to improper operation.
2. When adjusting the parameters of the biofuel pellet machine, it is necessary to pay attention to safety issues to avoid accidents.
3. After adjusting the parameters, a trial run is required to observe the pellet quality and production efficiency to determine whether the adjustment is reasonable.

