News

Biomass Pellet Machine Operation Guide

Its basic principle is to extrude the biomass raw materials through the die orifice under the pressure and friction in the pellet machine.
Biomass pellet machine operation process
1. Raw material selection: Select biomass raw materials with a certain density and water content, such as straw, sawdust, etc.
2. Equipment installation and commissioning: Install the biomass pellet machine according to the instructions, and commission each component to ensure normal operation.

 

biomass pellet machine

 

Model Capacity Power Dimensions
MK-250 100-200kg/h 15kw 1120*440*1060mm
MK-300 200-300kg/h 22kw 1280*560*1220mm
MK-350 300-400kg/h 30kw 1300*600*1250mm
MK-400 400-600kg/h 37kw 1390*650*1290mm
MK450 600-800kg/h 45kw 1620*700*1600mm


3. Operation skills:
(1) Control the feed speed to avoid equipment blockage due to too fast or too slow feed.
(2) Add lubricating oil regularly to ensure normal operation of the equipment.
(3) The particle size should be adjusted according to specific needs to avoid waste and poor production quality.
(4) When the biomass pellet machine has an abnormal situation, the equipment needs to be stopped immediately for inspection.
4. Making pellet fuel: Feed the processed biomass raw materials into the biomass pellet machine and extrude them through the die orifice.

You Might Also Like

Send Inquiry