What should I pay attention to during the processing of wood chip pellet machine?
Biomass pellet machine manufacturers suggest that during the processing of fuel pellets, raw materials should be mixed with water and stirred well before pelletizing. The proportion of raw materials is controlled at 50%. The feeding method can be manual, screw conveyor or belt conveyor. After the processing of rice husk pellet machine is finished, loosen the screws of the pressure roller to make the roller in a free state, and clean up the residual material after stopping the machine.
If only peanut shells are used, it is not necessary to crush them. You can make fuel pellets directly. If your raw materials include rice straw, rice straw stalks, etc., you need a crusher to break up the crops before processing them into fuel pellets through the rice husk pellet mill. As the raw material is too long, it cannot be directly crushed. In fact, such a project is suitable for rural business because these raw materials are abundant in the countryside.


