What Is a Biomass Briquette Machine? Working Principle and Types
Introduction
As energy demand grows, conventional natural resources are diminishing rapidly. Solar, wind and water energy can replace them for electricity, but none of these sources can be used directly as a fuel. The best non-conventional fuel is the biomass briquette: a dense, uniform block pressed from organic waste. A biomass briquette machine, also known as a biomass briquetting press, is the equipment that makes this transformation possible, and understanding how it works is the first step in choosing one.
A biomass briquette machine compresses wood chips and agricultural waste into solid fuel briquettes.
Briquettes can be used as fuel to generate heat or electricity, replacing coal and firewood.
The press types include screw press, piston press and ring die briquette machines, chosen by capacity and binder requirements.
Briquetting improves energy efficiency and diverts waste from landfills into useful products.
MKYK series covers 0.5-6.0 t/h capacity across six models from 45 kW to 250 kW.
What Is Biomass Briquetting?
Biomass briquetting, also known as biomass briquette pressing, is a process by which biomass material such as wood chips and agricultural waste is converted into compressed briquettes. This technique uses specialized machines, known as biomass briquetting presses, to produce solid blocks of biomass with a density far higher than the loose raw material. The benefits of this technology are numerous: not only does it allow for efficient energy use, but it also helps to divert waste material away from landfills and recycle it into useful products.
How a Biomass Briquette Machine Works
Loose biomass is fed into the machine, where a high-pressure mechanism, either a rotating die with rollers, a screw, or a reciprocating piston, forces the material through or against a forming die. The pressure compresses the material to a fraction of its original volume, and the friction-generated heat softens the natural lignin in the material, which binds the briquette together when it cools. Depending on the machine type and material, a small amount of binder may be added for materials low in natural lignin. The result is a dense, uniform briquette that stores and transports economically and burns evenly.
Types of Biomass Briquette Machines
Three press architectures dominate the market. Screw press machines extrude material through a heated die and produce solid, hollow-center briquettes that are carbonizable into high-grade charcoal; they suit materials with good binding properties. Piston press machines stamp material into briquettes with mechanical or hydraulic force, handle coarser feedstock, and run at high output with lower energy per ton. Ring die machines compress material through ring die holes into cylindrical pellets or briquettes, offering the highest capacity and the most uniform product, which is why industrial fuel plants favor them. The right type depends on raw material, target output and product form.
MKYK Series Specifications
| Model | Power | Mold Holes | Pellet Size (mm) |
|---|---|---|---|
| MKYK-36 | 45 kW | 36 | 32x32x50-100 |
| MKYK-48 | 75 kW | 48 | 32x32x50-100 |
| MKYK-72 | 110 kW | 72 | 32x32x50-100 |
| MKYK-90 | 132 kW | 90 | 32x32x50-100 |
| MKYK-120 | 200 kW | 120 | 32x32x50-100 |
| MKYK-150 | 250 kW | 150 | 32x32x50-100 |
Capacity depends on feedstock type, moisture and briquette size; confirm specific performance data with the manufacturer.
Applications of Biomass Briquettes
Briquettes serve as a fuel source to generate heat or electricity in boilers, furnaces, kilns and stoves. In industrial settings they replace coal in process heating, cutting both fuel cost and emissions. In rural and commercial heating they replace firewood with a denser, drier, more uniform fuel. And after carbonization, briquettes become charcoal for barbecue and metallurgical use, a product that commands a premium over raw lump charcoal. The versatility of the fuel is what makes briquetting equipment a sound investment for waste-rich operations.
Frequently Asked Questions
What is the difference between a briquette machine and a pellet machine? Both densify biomass, but briquette machines produce larger blocks, often 32 mm or more across, while pellet machines produce small cylindrical pellets. Briquettes suit stoves and boilers; pellets suit automated pellet burners.
Which materials can be briquetted? Wood chips, sawdust, straw, rice husks, bagasse, fruit shells and most dry agricultural or forestry residues, provided moisture is controlled and particle size is suitable.
Do briquettes need binders? Not for lignin-rich woody materials, which bind naturally under heat and pressure. Low-lignin materials such as some straws may need a small amount of organic binder.
Can briquettes be carbonized into charcoal? Yes. Screw-press briquettes in particular carbonize well into high-grade machine-made charcoal for barbecue and industrial use.
What is the capacity range of the MKYK series? The six MKYK models cover approximately 0.5-6.0 t/h, depending on feedstock and briquette size, with installed power from 45 kW to 250 kW.
Are briquettes environmentally better than coal? Yes. They burn biomass grown recently, keeping a balanced carbon cycle, and they turn waste that would otherwise be dumped or open-burned into a useful fuel.

