Knowledge

What are the operating procedures of the biomass pellet mill?

Preliminary preparation: Make sure the machine is in a stable position and connect the power supply. Prepare suitable biomass raw materials, such as wood chips, straw, etc. Check whether there are impurities inside the machine. If there are any, they should be removed.
Adjust the roller: Adjust the roller so that the outside of the roller is away from the inner wall of the ring die. Take protective measures when removing the gap adjustment block to avoid the loose connection between the ring die and the connecting sleeve after removing the screen and falling to the ground, causing losses.

 

What are the main technologies of biomass pellet machines?

 

Model Capacity Power Dimensions
MK-250 100-200kg/h 15kw 1120*440*1060mm
MK-300 200-300kg/h 22kw 1280*560*1220mm
MK-350 300-400kg/h 30kw 1300*600*1250mm
MK-400 400-600kg/h 37kw 1390*650*1290mm
MK450 600-800kg/h 45kw 1620*700*1600mm


Disassemble parts: Remove the feed hopper, loosen the clamping bolts on the cutter seat, move the cutter upward, and take protective measures when removing the ring die. It is recommended to use a crane to lift the ring die upward to avoid losses.
Clean the machine: When the pellet mill is stopped, the material in the die hole must be cleaned and then the power should be turned off.
In addition, the operating procedures of the biomass pellet mill should also pay attention to matters such as safe operation, maintenance, and troubleshooting.

You Might Also Like

Send Inquiry