Fuel pellet machine not pelletizing factors?
The output of the rice husk pellet machine is too low, or even no pellet production, or a lot of powder. Although this problem doesn't occur often, if it does, it means that you didn't polish the press wheel and grinding disk well during the grinding process of the rice husk pellet machine pellets. A similar problem may also occur because the grinding holes in the grinding disk were not well polished when you first started using the rice husk pellet mill. The output of the rice husk pellet mill will reach the normal output after the grinding disk is sharpened with abrasive material or after it has been used for a period of time.
If the moisture content in the processed raw material is not well controlled, it will also affect the output of the rice husk pellet mill. The moisture in the raw material should be controlled at 13%-20%. Biomass pellet mill manufacturers are now developing a new type of rice husk pellet mill with the function of drying and curing. The biomass fuel pellet material pressed out by the rice husk pellet machine can be bagged after 5-10 minutes of shade drying at room temperature.


