How to adjust the fuel pellet machine?

                     Adjust the pressure of longitudinal heat sealing roller, transverse heat sealing roller and cooling roller. So that it can heat seal better. The technicians of biomass pellet mill manufacturers suggest adjusting the biomass pellet mill with attention to the uniform adjustment of the pressure on the left and right sides, and adjusting the fine-tuning nut on the mold mounting shaft to align the left and right wrong sides of the mold.

                     Adjust the cutting device. The adjustment range is from 1 to 359, the number increases for upward adjustment, otherwise for downward adjustment. Be careful to avoid adjusting within the number range of 355 to 5, which will cause the cutter not to start. Connecting the biomass pellet mill is complete. Biomass pellet machine standard: pellet hot air is normal, no leakage, the left side of the mold should be left about 1 ~ 1.5mm edge to prevent the left and right misalignment, control within ± 1mm. Pellet cut depth 3mm, cross distance 5 ~ 10mm.