Factors affecting the life of wood chip pellet mill?
When using sawdust pellet machine, the factors affecting the service life of sawdust pellet machine are as follows. Material moisture is too low, the hardness of the processed product is too strong, and the power consumption of the sawdust pellet machine equipment during processing is large, which increases the production cost of the enterprise and reduces the service life of the sawdust pellet machine. The amount of water is too large, easy to be crushed, increasing the number of hammer impacts.
When the material crushing is about to finish, mix a little wheat husk with cooking oil and put it into the sawdust pellet mill machine. After 1-2 minutes of pressing, stop the machine to make the sawdust pellet machine mold hole full of oil for the next start-up production, both to maintain the mold, but also to save man-hours. After stopping the sawdust pellet machine, loosen the adjusting screw of the pressure wheel and remove the residual material.


