The use and precautions of wood chip pellet machine?

                      When the new straw pellet machine is grinding, take 10-20 kilograms of mixed powder, add 5%-10 kilograms of edible oil, mix well, turn on the straw pellet machine, and adjust the roller bolt with a wrench until the material is discharged normally. After the oil is repeated 3-5 times in the machine, gradually add the dry material. Adjustment of feeding length. Adjust the length of the pellets by adjusting the knives set on the edge of the discharge opening.

                     The new straw pellet machine must be run once in use or it will not work properly. Do not put your hand into the feed opening when the straw pellet machine is working. Before starting the straw pellet machine, add less material before starting the machine. When stopping the machine, a little material should be left in the machine to prevent the straw pellet machine pressure roller from contacting the template and idling. If the straw pellet machine is stuck during operation, it should be stopped immediately, wait for the pressure roller to be pressed down, and restart the machine after loosening the tightening bolt.