Knowledge

Biomass Briquette Machine: Equipment Type, Working Principle and Specifications

What a Biomass Briquette Machine Is

A biomass briquette machine is a mechanical press that turns loose agricultural residues, mainly straw, into dense square briquettes that serve as commercial fuel. The densified product overcomes the practical shortcomings of raw straw, such as light weight, large volume and easy damage from wind, rain, snow and fire during use, and it meets the requirements of commercial handling. Once compressed, the fuel can be stored, transported and burned in the same way as conventional solid fuel.

The equipment also widens the range of usable feedstock. Because straw and similar crop residues can be pressed into a stable, predictable shape, briquetting raw materials become far more widely available, and a material that was once a disposal cost becomes a saleable energy product with a consistent energy value per unit of volume.

How the Flat Die Pressing Process Works

Loose biomass is fed into a forming chamber where a flat die plate and hardened pressing rollers compact the material under high pressure. The flat die design presses the material from above through a stationary die plate, so the briquettes leave the die with a consistent cross-section. They emerge in a fixed profile, typically square, and are cut or broken to the required length before cooling.

Three variables govern the result: the pressure generated between the rollers and the die, the moisture content of the incoming material, and the condition of the die holes. A steady feed rate keeps all three stable. When the feed becomes uneven, the chamber pressure fluctuates, the molding rate falls, and the briquettes become brittle or inconsistent in density.

Why Straw and Crop Residues Need Densification

Raw straw presents three practical problems at the same time:

Low bulk density - loose straw is light, so the transport cost per ton of delivered energy is high.

Large volume - the material occupies a great deal of storage space and is difficult to handle mechanically.

Weather and fire exposure - open storage leaves the material vulnerable to wind, rain and snow, and creates a fire risk.

Briquetting solves all three problems in a single step. Compressed briquettes have a predictable density and shape, stack efficiently, and resist weather and fire far better than loose straw. That transformation is what turns straw from a disposal problem into a commercial fuel, and it is also what makes the feedstock supply chain practical for industrial buyers who need a dependable, transportable solid fuel.

Biomass Briquette Machine Specifications

The table below lists the published specifications of a flat die biomass briquette machine series, including output, motor power, briquette size and die hole quantity.

Model Power Capacity Briquette size Hole quantity
MK-550 55 kW 1 t/h - 1.5 t/h 32 x 32 mm 36 pcs
MK-750 75 kW 1.5 t/h - 2 t/h 32 x 32 mm 54 pcs
MK-900 90 kW 2 t/h - 2.5 t/h 32 x 32 mm 72 pcs
MK-1600 160 kW 2.5 t/h - 3 t/h 32 x 32 mm 120 pcs

Actual output depends on the raw material, its moisture content and the particle size of the feed. A machine rated at 2 t/h on dry, fine straw will produce less on wet or coarse material. When sizing a press for a specific plant, match the rated capacity of the machine to the realistic, moisture-adjusted output of the feedstock rather than to the headline figure.

Design Features and Post-Pressing Handling

Advanced flat die technology improves the molding rate of the fuel. The large feeding bin provides sufficient feeding space for fluffy raw materials, and self-weight feeding is efficient and practical. The special design of the template makes the briquettes dense with a smooth surface, while the wearing parts are easy to disassemble and assemble so that maintenance stays simple and convenient.

An automatic compensation and adjustment device responds to changes in the raw material so that the material will not be clumped, blocked or stuffy. The extended service life of the key components increases the trouble-free operating time of the whole machine, which raises output and reduces operating cost per ton.

After briquetting, air drying should bring the moisture content down to less than 15 percent. Moisture control matters for two reasons: wet fuel burns inefficiently and produces more smoke, and damp briquettes are prone to mildew during storage. When moisture is kept below 15 percent, storage is relatively simple and there is no need to worry about mildew or about dust during handling. Keep briquettes in a dry, ventilated area and stack them off the ground to hold the target moisture level.

Frequently Asked Questions

Q: What kind of equipment is a biomass briquette machine?
It is a mechanical press built around a flat die plate and hardened pressing rollers, which compact loose straw and similar residues into dense square briquettes for use as commercial solid fuel.

Q: Why is straw briquetted instead of burned loose?
Raw straw is light, bulky and easily damaged by wind, rain, snow and fire. Briquetting raises density, reduces storage volume and makes the fuel resist weather far better during handling and transport.

Q: What moisture content should the finished briquettes have?
Air dry the briquettes to below 15 percent moisture. Above that level the fuel burns inefficiently, produces more smoke and is prone to mildew during storage.

Q: What shapes and sizes do the briquettes have?
The press produces a fixed square cross-section of 32 x 32 mm on the models listed above. Length is set by the cutting or breaking step rather than by the die profile.

Q: How often do wearing parts need to be replaced?
Die and roller life depends on the abrasiveness of the feedstock and on moisture control. Keeping ash, sand and grit out of the feed, and keeping moisture below 15 percent, extends service life considerably.

Q: Can one machine handle different raw materials?
Yes, within limits. The automatic compensation and adjustment device responds to changes in the material so it does not clump, block or become stuffy, but the die and the feed preparation still need to match the dominant feedstock.

You Might Also Like

Send Inquiry