Knowledge

Do you know the structure of wood pellet machine?

1. Transmission system of wood pellet machine
This machine is composed of feeding system, stirring system, pressing system and electronic control system; it adopts gearbox transmission, which has more stable performance.

2. Main structure
(1) Overall structure of wood pellet machine
The pellet machine is composed of conditioner, iron removal device, pellet press assembly and feeding port assembly equipped with overload safety door, etc. It is equipped with forced feeding motor and manual overload discharge device.
(2) Ring die and roller
To obtain high-efficiency and high-quality pellets, the ring die and roller must be selected correctly. It is the heart of the machine and the key component. The ring die is made of high-quality alloy steel or stainless steel, and the roller is mainly composed of eccentric shaft, roller shell, bearing spacer ring, etc. We can provide ring die and roller according to user needs.
(3) Main drive
The rotation of the ring die is transmitted to the main shaft by the motor through the gearbox, and the main shaft drives the roller to rotate. The mold is stationary, which improves the molding rate and the stability of the equipment. There is no doubt that gearbox transmission is the most widely used and most stable transmission method in the world.
(4) Conditioner
The conditioner is paddle-type and the transmission is belt-driven. There is a pipe for adding steam or water on the side, which is connected to the system pipe with a flange.
(5) Pellet mill feeder
The feeder is fed by the upper chute, which is inclined. The valve at the bottom is equipped with a permanent magnet to remove iron impurities in the material. The lower part is equipped with an overload safety door. When the main motor is overloaded, the safety door can be opened manually to discharge the material.

 

industrial wood pellet machine

Model Capacity Power Dimensions Weight
MK-250 100-200kg/h 15kw 1120*440*1060mm 400kg
MK-300 200-300kg/h 22kw 1280*560*1220mm 700kg
MK-350 300-400kg/h 30kw 1300*600*1250mm 800kg
MK-400 400-600kg/h 37kw 1390*650*1290mm 1000kg
MK450 600-800kg/h 45kw 1620*700*1600mm 1500kg


(6) Thermometer and temperature sensor
When steam is added for conditioning, a thermometer or temperature sensor should be installed on the conditioner. When the pellet mill is manually controlled or simply load controlled, the thermometer is installed on the outlet side of the steam conditioner to directly observe the temperature of the incoming material.
(7) Pellet mill control system
The pellet mill is designed as a manual system. The frequency converter is used to control the feeding amount of the screw conveyor, which can achieve stepless speed regulation; the feeding amount can be adjusted on site in time according to the load of the main motor of the pelletizer.
When the main motor is overloaded, the overload valve is manually opened in time to discharge the material from the conditioner to reduce the load of the pelletizing chamber.
(8) Safety device
Each pelletizer is equipped with a safety device.

You Might Also Like

Send Inquiry