Do I need to clean the wood pellet mill after use?

            When the machine is finished using or stopped, the rotating drum should be taken out for cleaning and brushing the remaining powder in the hopper, and then loaded properly to prepare for the next use.

            If stopped for a long time, the machine must be wiped clean all over the body, the glossy surface of the machine parts coated with antirust oil, covered with a cloth. When the drum in the work of the back and forth scurrying, if the gear shaft scurrying, adjust the gap to the bearing does not sound, hand turn the pulley, tighten or loosen the appropriate appropriate, too tight or too loose can make the machine may be damaged.