Best Tips for Adjusting a Small Biomass Briquette Making Machine
Product Description
Pressure Parameters: Determine Finished Product Density. Pressure is the core of molding, and different biomass brick press machines have different control ranges: screw type 15-30MPa, hydraulic type 20-40MPa, flat type 10-20MPa. High-quality fiber raw materials (wood chips) can be controlled at the lower limit of the range, while low-fiber raw materials (straw) need to be adjusted to the upper limit. If the finished product is loose during operation, the pressure needs to be increased; if the equipment overheats severely or makes obvious abnormal noises, it needs to be appropriately lowered to avoid excessive load and damage to components.
Temperature Parameters: Adapt to Lignin Softening. The normal temperature control range is 160-200℃. Sawdust log press machines with heating devices can be set directly through the panel. When the moisture content is high, adjust to 180-200℃ to accelerate moisture evaporation; when the moisture content is low, adjust to 160-180℃ to avoid lignin carbonization. For screw-type models without heating devices, frictional heat is controlled by adjusting the feed speed; the faster the feed and the more intense the friction, the higher the temperature.
Rotation speed parameters: Balancing efficiency and uniformity. The rotation speed of a sawdust brick press machine affects molding uniformity and production capacity. The screw shaft and pressure roller speeds should be controlled between 50-200 r/min, with lower values for smaller models and higher values for larger models. When compressing coarse raw materials, reduce the rotation speed to extend the residence time and ensure sufficient extrusion; when compressing fine raw materials, increase the rotation speed to improve efficiency. The cutter speed must be synchronized with the molding speed to avoid inconsistent finished product lengths.
about us
Customer visit
Certificate of Honor
FAQ
1.What is the price of equipment for the small briquette press machine for home?
It costs approximately US$1,500.00 - 25,000.00
2. If equipments have some quality problem, how would you deal with?
We will responsible for all the quality problems. Change all the parts for free.
