Continuous Carbon Rod Production Equipment

Before using the carbonization furnace, you should first check whether the fan rotates flexibly and smoothly; whether there is any water leakage in the condenser; whether the joints of various components are tight, whether the sealing rock wool of the furnace door and the fire door is sufficient, etc.; then put firewood sticks into the furnace. It should be noted that the firewood sticks must be evenly laid out. After filling, close the furnace door, ignite the fuel in the ignition furnace, start the induced draft fan, close the upper fire door, open the lower fire door, adjust the valve of the smoke outlet, keep the flue unobstructed, and remove the ignition furnace when smoke comes out. Next, control the temperature in time, which requires certain production experience. Finally, the carbonization is completed, and the furnace door can be opened only when the temperature in the furnace drops to below 100℃. Prepare water in advance. When taking out, if there is charcoal with sparks, put it in water to extinguish it. This is the operation method of the carbonization furnace.

1. Charcoal production: Continuous carbonization furnaces have been widely used in charcoal production, which can greatly improve carbonization efficiency, reduce energy consumption and reduce production costs.
2. Crop residue treatment: The treatment of crop residues has always been a difficult problem. Continuous carbonization furnaces can efficiently treat crop residues and convert them into useful resources.
3. Biomass energy production: Biomass energy production is also an important application area of ​​continuous carbonization furnaces. By carbonizing biomass materials, they can be converted into useful fuels.