Coconut Shell Carbonization Furnace

Carbonization furnace introduction:

The device of the continuous carbonization furnace adopts the cyclone spiral drum carbonization process. The carbonization furnace is a straight cylinder lined with refractory materials. The feed material is sucked into the material from the feed pipe by the fan. The material enters the carbonization chamber from the conveyor and falls along the spiral. It is carbonized by high-temperature radiation and releases water and volatile matter to complete carbonization. The released volatile matter is burned in the furnace. , increases the furnace temperature, and is discharged from the top, and can be connected with heating, bathing equipment, etc. through the heat exchanger for reuse. The carbonization process is carried out continuously, so that the carbonization temperature can be between 800-1000 degrees, and the carbonization rate can reach more than 90%. This can ensure better carbonization of the material without burning out the charcoal in the carbonized plant material, thereby obtaining carbon-containing materials. A good product with high quantity and neat particles.The entire carbonization process is carried out in a closed system. The flue gas generated by carbonization undergoes three stages of dust removal to meet energy saving requirements. The heat is recovered and reused to form cyclic carbonization and reduce energy consumption.Of course, this device also has many advantages. Let's briefly take you through them.

Carbonisation furnace

Continuous carbonization furnace advantages:
Because the carbon monoxide and other composite combustible gases generated by carbonization enter the flue and undergo purification and filtration for cyclic combustion, it completely solves the problem of substandard smoke exhaust from traditional carbonization equipment. Combustion and full use of waste heat realize the drying, preheating and carbonization stages of raw materials, solving the problems of high energy consumption, high pollution and high cost in the traditional carbon powder carbonization furnace production process, and completely achieving the environmental protection goals of energy saving and emission reduction. It can be seen that this is a device with very good development prospects and is very popular.Of course it will also be favored by more and more people.Because this equipment is indeed a rare and good equipment. At the same time, we are also confident that we can meet your needs.Because we are a manufacturer with a very good reputation.

Carbonization stove

Carbonization furnace for charcoal analysis:
1. Evacuate the steam (white smoke) generated by the drying of the carbonization tube in the upper part of the carbonization furnace;
2. After the carbonization tube in the lower part of the carbonization furnace generates smoke, open the combustible smoke valve. When the smoke is almost invisible, it means that the smoke generated during the carbonization process has been completely recovered. The recovered smoke has been sprayed, The cooling, purification and other processes turn into flammable gas and enter the burner at the bottom of the carbonization furnace for secondary combustion. At this time, the gasification furnace is closed.
3. Circulate in this way and use the gas produced by itself to burn itself to achieve the effect of energy saving.
4. The entire process can be continuously carbonized, with no pollutant smoke emissions. It is environmentally friendly and meets exhaust gas emission standards.

5.Our equipment is reasonably priced, shipped on time, and our after-sales service is perfect, making it your best choice.

Our team

Customer visit

Hot Tags: coconut shell carbonization furnace, China coconut shell carbonization furnace manufacturers, suppliers, factory, carbonization hardness, rotary carbonization furnace, carbonization seal, carbonization collector, carbonization unit, stationary carbonization furnace