Biomass Wood Pellets Mill Making Line

 As an efficient and environmentally friendly processing equipment, the biomass pellet machine production line has important application prospects in many fields and is of great significance to the effective utilization of resources and environmental protection.

The wood pellet production line starts with a wood chipper, which is used to shred the raw materials into smaller pieces.The wood chips produced can be as small as 3cm and no larger than 8cm. The shredded materials are then fed into a hammer mill, where they are further crushed into sawdusts or fine powder.

There is a large amount of biomass waste in our production and life that can be used to process wood pellets. 
The selection of the biomass pellet machine should be determined based on the diameter and hardness of the particles;
The selection of the cooler should consider factors such as the temperature and moisture content of the particles;The fuel pellet production line can reduce environmental pollution. After pretreatment, the material enters the pelletizer (through the action of centrifugal force, the material continuously moves in a circular motion and adheres to the inner wall surface of the die, forming a uniform annular material layer, and the material is continuously rotated and extruded by the roller, so that it is forced into the ring die hole for forming and continuously extruded outward).