Products
Grass Pellet Maker
The fuel produced by the wood pellet machine can be used in fuel plants or in the heating industry.
Features
Straw pellet machine
Waste wood has always been an important energy source for human survival. It is the fourth energy source in total energy consumption after coal, oil and natural gas, and occupies an important position in the entire energy system. According to relevant estimates, waste wood energy will become an important part of the future sustainable energy system. By the middle of this century, various waste wood alternative fuels produced by new technologies will account for more than 40% of the total energy consumption.
Rice straw pellet making machine

| Model | Capacity | Power | Dimensions | Weight |
| MK-250 | 100-200kg/h | 15kw | 1120*440*1060mm | 400kg |
| MK-300 | 200-300kg/h | 22kw | 1280*560*1220mm | 700kg |
| MK-350 | 300-400kg/h | 30kw | 1300*600*1250mm | 800kg |
| MK-400 | 400-600kg/h | 37kw | 1390*650*1290mm | 1000kg |
Wood pellet extruder
The full combustion of biomass pellet fuel requires an appropriate amount of air: if the amount of air is too little, the combustible components cannot be fully burned, resulting in incomplete combustion losses; but if the amount of air is too much, it will reduce the temperature of the combustion chamber and affect the degree of complete combustion. There is sufficient combustion time: the fuel combustion has a certain speed, and it takes a certain amount of time to reach the maximum degree of combustion. The big problem of combustion regulation is to keep the residence time of the combustion in the combustion furnace as much as possible. As long as there is enough combustion time, complete combustion can be achieved. Can mix oxygen in time: the primary wind is enough to blow away and penetrate the fuel; the secondary wind is strong and enters quickly. There should be no lack of oxygen in the fierce combustion. In the upper part of the furnace combustion area, sufficient oxygen should be maintained. The upper secondary air should be opened as much as possible, and the third superheater is not bounded by overheating. After the flame in the furnace, the temperature field gradually decreases.
Husk pellet machine

Bio pellet machine
Corn straw pellets have the advantages of high density, high calorific value, good combustion, low cost, convenient use, clean and hygienic. It is easy to store and transport. The straw pellet machine can not only solve the basic living energy in rural areas and increase farmers' income, but also is an emerging biomass power generation fuel. The biomass pellet fuel pressed out by the wood chip pellet machine production line is a modern clean fuel that can be directly used in traditional coal-fired boiler equipment in cities and can replace traditional coal. Straw fuel is highly volatile, easy to precipitate, has good carbon activity, is flammable, has less ash, ignites quickly, saves more fuel, and reduces the cost of use.
Our team

Qualifications and honors

Hot Tags: grass pellet maker, China grass pellet maker manufacturers, suppliers, factory, wood pelletizer for moisture control, pelletizer for wood pellet size control, pellet production equipment for biomass pellet safety, pellet production equipment for biomass pellet storage, pellet mill for biomass, sawdust pellet making machine
You Might Also Like
Send Inquiry




