Products
Garden Branch Crusher
The wood chipper is not difficult to operate and is very simple to use.
Features
Products Description
Large-scale branch crushers not only have efficient crushing capabilities, but also can transform discarded branches into valuable resources, realizing the recycling of resources.
Before operation, please ensure that the branch crusher is placed on a flat, solid ground, away from fire sources and flammable items. Check whether all parts of the machine are intact, especially key parts such as blades and bearings. Ensure that the power connection is stable and well grounded to avoid the risk of electric shock.
Product Parameters
| Model | MK-800 | MK-1000 | MK-1200 |
| Diesel engine | 32HP | 55HP | 80HP |
| Fuel consumption t/L | 4 | 6 | 10 |
| Number of blades | 3 movable knives, 1 static knife | 3 movable knives, 1 static knife | 3 movable knives, 1 static knife |
| Inlet size(mm) | 200*220 | 200*220 | 420*380 |
| host speed(r/min) | 1080 | 1080 | 1800 |
Product Analysis
Turn on the power switch and start the motor. Observe the direction of the motor to ensure that it is consistent with the direction marked on the equipment.
Check whether there are any abnormal sounds or vibrations in each part. If there are any abnormalities, stop the machine immediately for inspection.
Put the pruned branches evenly into the feed port to avoid overloading the machine due to too much at one time.
Remove impurities such as stones and metals from the branches as much as possible to avoid damaging the blades.
During the feeding process, pay attention to the discharge port to ensure that the crushed materials meet the requirements.
During the operation of the machine, the oil temperature and oil level should be checked regularly to ensure that the lubrication system is normal.
Pay attention to the temperature of the motor. If there is overheating, the machine should be stopped for heat dissipation.
Regularly clean the dust and debris inside and outside the machine to keep the machine clean.
When it is necessary to stop the machine, the feeding should be stopped first, and the machine should be idle for a period of time to clean the residual materials inside.
Turn off the power switch, disconnect the power plug, and ensure that the machine stops running completely.
Clean and check the blade. If it is worn or damaged, it should be replaced in time.
Qualifications and Honors
Customer visit
Hot Tags: garden branch crusher, China garden branch crusher manufacturers, suppliers, factory, wood pellet machine for home use, Hay briquetting machine, tree wood chipper, Ring mould wheat straw briquette machine, Sawmill Ring Die Pellet Mill, Small wood shredding plants
You Might Also Like
Send Inquiry
