Why Can’t Water Be Added During Operation Of The Bio-granulator?
Biomass fuel already contains a moderate amount of moisture. Adding extra water will cause the moisture content of the fuel to exceed the standard, which will affect the adequacy of the combustion process. Insufficient combustion not only reduces energy efficiency, but may also produce more pollutant emissions.
The increase in moisture will cause the volume of biomass fuel to expand, which brings additional challenges to the transportation and storage of fuel. The expanded fuel may not fit into the original storage space, increasing the handling cost and safety risks.
| Model No. | Capacity(kg/h) | Power(kw) | Weight(t) |
| RKL-250 | 100-200 | 15 | 0.5 |
| RKL-300 | 150-250 | 22 | 0.65 |
| RKL-350 | 100-300 | 30 | 0.76 |
| RKL-400 | 300-600 | 37 | 2.2 |
| RKL-450 | 500-800 | 55 | 4.3 |
| RKL-550 | 1000-1500 | 90 | 5.5 |
Excessive moisture will produce a large amount of water vapor during the combustion process, which may cause corrosion and decay after condensation inside the equipment, seriously affecting the service life and operational stability of the equipment. To avoid such damage, the moisture content in the fuel must be strictly controlled.
When operating biomass fuel equipment, you should first ensure that the dryness of the fuel used meets the equipment requirements. After setting the appropriate combustion temperature, follow the installation and startup guide in the equipment manual. The moisture content of the fuel needs to be continuously monitored during use. Once it is found to exceed the standard, the dry fuel should be replaced immediately.
Through the above analysis, we have clarified the reasons why it is strictly forbidden to add water to biomass fuel equipment and its importance in actual operation. To ensure optimal performance and long-term use of the equipment, this operating principle must be strictly followed.
