What's The Matter With The Fuel Pellet Machine Not Discharging Materials?
The fuel pellet machine, a magical device that can convert straw, sawdust, cattle and sheep manure, etc. into fuel pellets, is not always satisfactory in actual use. If it is not operated properly or lacks the necessary maintenance, it may encounter various problems, one of which is that it cannot discharge normally. So, what exactly causes the fuel pellet machine to fail to press out fuel pellets? Next, we will explore the possible reasons in depth.
The fuel pellet machine cannot discharge normally, which may be related to the characteristics of the raw materials. When the moisture content of the raw materials is too high or too low, it will affect the pressing effect of the pellet machine. However, this does not mean that it cannot be solved. We can improve the pressing effect by adjusting the moisture content of the raw materials, thereby ensuring that the fuel pellet machine can discharge normally. Next, we will also explore other possible reasons.
| Model No. | Capacity(kg/h) | Power(kw) | Weight(t) |
| RKL-250 | 100-200 | 15 | 0.5 |
| RKL-300 | 150-250 | 22 | 0.65 |
| RKL-350 | 100-300 | 30 | 0.76 |
| RKL-400 | 300-600 | 37 | 2.2 |
| RKL-450 | 500-800 | 55 | 4.3 |
| RKL-550 | 1000-1500 | 90 | 5.5 |
Originally we produced straw fuel, but now we need to switch to the production of wood chip fuel. This change means that we must adjust the compression ratio. If the compression ratio is not adjusted accordingly, the fuel pellets may not be successfully pressed out. Next, we will explore the feeding link.
Different models of fuel pellet machines will also have different outputs. The feeding speed is not the faster the better, but it needs to be consistent with the discharge speed of the fuel pellet machine to ensure the normal operation of the machine. If the feeding speed is too fast, it may cause the die hole of the fuel pellet machine to be blocked, thus affecting the discharge. Therefore, during operation, we need to pay attention to controlling the feeding speed to ensure that it is coordinated with the discharge speed.
