What Should The Operator Of The Wood Pellet Mill Pay Attention To?

                   Safety precautions for operators of wood chip pellet machine: when feeding, the operator should stand on the side of the straw pellet machine to prevent the rebounding debris from hurting his face. Do not touch the rotating parts of the machine with your hands or other objects at any time. Touching the rotating parts can cause direct injury to the person or the machine. If there is vibration, noise, high temperature of the bearings and straw pellet machine, external spray, etc., the machine should be stopped immediately for inspection, and continue to work after troubleshooting.

                  The material to be crushed should be examined carefully so that hard objects such as copper, iron and stones will not enter the crusher and cause accidents. Do not operate any switch knob with wet hands to avoid electric shock. The dust accumulated in the workshop should be cleaned up in time. Smoking and other fires are prohibited in the workshop to prevent dust explosion. Do not check or replace electrical components with electricity, as this may result in electric shock or injury. Pellet machine manufacturers suggest that when repairing the straw pellet machine, make sure that the straw pellet machine is in a stopped state, hang and cut off all power supplies and hang warning signs to avoid personal accidents when the straw pellet machine is suddenly running.