What Principles Should Be Followed When Using The Wood Pellet Machine?

             When using the wood pellet machine, you should also pay attention to adjusting the pressure roller screw evenly, until it can not be turned by hand. When starting the biomass fuel pellet machine, check whether the rotation of each pressure roller touches the disk surface. If not, adjust it again until it touches the disk surface. Repeatedly grind with oil, add a small amount first and put it in after normal discharging. Repeat this for half an hour.

             Fuel pellet processing ingredients should be mixed with water and stirred well. If there is more grass, the molding is not good, the proportion of raw materials should be increased. Feeding can be manual or belt conveyor. Stop the machine, loosen the screws of the pressure roller, make the pressure roller in a free state, and clean up the residual material. If it is not used for a long time, please press the oil into the biomass fuel pellet machine to prevent clogging.