News

What Is The Reason For The Failure Of Biomass Pellets To Be Formed?

Biomass pellet machines have the ability to convert a variety of raw materials into high-density biomass pellet fuels. Whether it is wood materials such as logs, sawdust, shavings, or agricultural residues such as corn, wheat straw, and straw, or even industrial waste such as building templates and woodworking scraps, or even fruit shells, fruit residues, brown aluminum, and sludge, they can be properly pretreated and processed, and then converted into high-density biomass pellet fuels through the curing and extrusion process of the biomass pellet machine. This fuel not only has the advantages of high efficiency and environmental protection, but also effectively utilizes various waste resources and realizes the recycling of resources.

 

Model Capacity Power
MK-250 100-200kg/h 15kw
MK-300 200-300kg/h 22kw
MK-350 300-400kg/h 30kw
MK-400 400-600kg/h 37kw
MK450 600-800kg/h 45kw


Different raw materials have their own unique characteristics and fiber structures, which directly affect the difficulty of curing them into pellets. For example, the pelletizing process of relatively soft wood chips such as pine wood is usually smoother. However, if the raw material is too hard or in the form of flour-like fine powder, the pelletizing process will be relatively difficult, and auxiliary materials such as wood shavings are usually required. In addition, the mixing ratio between different materials is also a key factor affecting the forming rate, which needs to be carefully adjusted to achieve the best effect.

 

wood pellet machine


When pressing biomass pellets, the moisture content of the raw material is the key. If the moisture content is too high, the pellets will be low in hardness and easy to loosen; if the moisture content is too low, it will be difficult to form and there will be a lot of powder. Different raw materials such as pine and fir have different moisture requirements, but generally need to be controlled at around 15%. The specific moisture content should be adjusted according to the actual production situation to ensure the best working effect of the pellet machine.

You Might Also Like

Send Inquiry