Operation And Common Problems Of Biomass Pellet Machine
First, clean the raw materials and remove debris, moisture, etc. After that, crushing, screening and other treatments are required for further processing. At the same time, the required tools and materials, such as hammers, wrenches, oil, etc., need to be prepared.
Start the equipment
Before operating, it is necessary to install and wire correctly according to the equipment manual. Before starting the equipment, it is also necessary to check whether the components are tightened, whether the lubrication is in place, whether the electrical components are normal, etc. When starting the equipment, the dust removal device should be started to reduce the harm to the operator. In addition, it is also necessary to open the gates of the feeding mechanism and the discharging mechanism, and adjust the size of the gap between the feeding mechanism and the pressure wheel.
Precautions during production
When operating the biofuel pellet machine, the operator needs to pay attention to the following points:
1. Regularly check and clean the equipment, check the operating status of the equipment in time, and deal with problems in time.
2. Appropriately adjust the parameters of the pellet machine such as pressure, temperature and speed to ensure production efficiency and pellet quality.
| Model | Capacity | Power | Dimensions |
| MK-250 | 100-200kg/h | 15kw | 1120*440*1060mm |
| MK-300 | 200-300kg/h | 22kw | 1280*560*1220mm |
| MK-350 | 300-400kg/h | 30kw | 1300*600*1250mm |
| MK-400 | 400-600kg/h | 37kw | 1390*650*1290mm |
| MK450 | 600-800kg/h | 45kw | 1620*700*1600mm |
3. Control the feed amount and feed speed to avoid too fast or too slow, and avoid clogging of the equipment.
4. Control the production temperature to ensure that the equipment is within the normal operating temperature range. At the same time, pay attention to adjusting the exhaust volume of the dust collector to ensure environmental hygiene during production.
5. Maintain the maintenance and warranty of the equipment, and replace the wearing parts in time according to the use of the equipment.
FAQ
1. What should I do if the pellet machine is broken?
If you encounter a malfunction of the biofuel pellet machine, do not patch it up and repair it yourself. You should contact the manufacturer or technicians in time for processing.
2. The pellets of the pellet machine are not good?
If the pellets produced by different types of pellet machines are of different quality, it may be because the quality of the raw materials is different or the production parameters are not set correctly. At this time, adjustments need to be made to improve the quality of the pellets.
