Tips For Adjusting Parameters Of Biofuel Pellet Machine
1. Preparation before adjustment
Before starting to adjust the parameters of biofuel pellet machine, it is necessary to clean and maintain the equipment to ensure the good operation of the equipment.
2. Adjust the pressure of pellet machine
The pressure of pellet machine is an important parameter affecting the quality of biofuel pellet machine. Proper adjustment of the pressure of pellet machine can ensure that the pellet machine produces high-quality pellets and ensure the long-term stable operation of the pellet machine. When adjusting, increase the pressure appropriately, but also need to be careful not to overdo it to avoid problems such as burning and jamming.
3. Adjust the speed of pellet machine
The speed of pellet machine will affect the output and pellet quality of pellet machine. Generally speaking, lower speed can improve pellet quality, but reduce production efficiency; higher speed can improve production efficiency, but pellet quality may decrease. Therefore, it is necessary to adjust the speed according to the actual situation to balance the output and pellet quality of pellet machine.
| Model | Capacity | Power | Dimensions | Weight |
| MK-250 | 100-200kg/h | 15kw | 1120*440*1060mm | 400kg |
| MK-300 | 200-300kg/h | 22kw | 1280*560*1220mm | 700kg |
| MK-350 | 300-400kg/h | 30kw | 1300*600*1250mm | 800kg |
| MK-400 | 400-600kg/h | 37kw | 1390*650*1290mm | 1000kg |
| MK450 | 600-800kg/h | 45kw | 1620*700*1600mm | 1500kg |
4. Adjust the feed speed of pellet machine
The feed speed directly affects the output and pellet quality of pellet machine. If the feed speed is too fast, the pellet machine will be blocked and the pellet quality will decrease; if the feed speed is too slow, the output of pellet machine will be affected. Therefore, when adjusting the feed speed, it is necessary to make a comprehensive consideration based on the actual production capacity of the pellet machine and the pellet quality requirements, and adjust the feed speed appropriately.
V. Precautions
1. When adjusting the parameters of the pellet machine, it is necessary to operate according to the equipment manual to avoid damage to the equipment due to improper operation.
2. When adjusting the parameters of the biofuel pellet machine, it is necessary to pay attention to safety issues to avoid accidents.
3. After adjusting the parameters, it is necessary to conduct a trial run to observe the pellet quality and production efficiency to determine whether the adjustment is reasonable.
