Step Analysis Of Fuel Pellet Machine?

                     The crushing steps of the biomass pellet machine: The biomass pellet machine crushes the raw materials and turns them into materials with smaller particle sizes for subsequent processing. This step generally uses a wood chipper, which feeds the raw materials into the machine and breaks them into small pieces through cutting and tearing. Step 2: Compression. After crushing, the raw materials are fed into the granulator and compressed to turn them into compact granules. This step is a step of the biomass pellet machine, which requires controlling parameters such as temperature and pressure to control the quality and molding rate of the pellets.

                     Step 3: Shaping. After compression treatment, the raw material enters the molding machine and is transformed into particles of consistent size and regular shape through the action of the mold. This step requires selecting different molds based on different raw materials and particle sizes to ensure particle quality and molding rate. Step 4: Cool down. The formed particles need to be cooled down to below room temperature for subsequent packaging and storage. This step generally uses a cooling machine. The particles are sent into the cooling machine and cooled to below room temperature through air cooling or water cooling. The above is the principle of biomass pellet machine. Through the above four steps of processing, the raw materials can be processed into high-quality granular materials, which have the advantages of high calorific value, low ash content, low moisture content, etc., and are an extraordinary form of biomass energy.