Kazakhstan Customer Bought Our Fuel Pellet Machine And Came To Visit Our Company.

Nowadays, we have higher and higher requirements for environmental protection, for fuel, the less waste emission, the more favorable to the environment, therefore, there is the emergence of fuel pellet machine, and the quality of the equipment is good, the failure rate is low, the output of the pellet fuel quality is good, very resistant to combustion, in the work of the equipment, we led the customer to our factory, the customer said that our equipment is very professional, and our production Workshop is very clean and tidy, said we can see our heart, for our hospitality, the customer is also very grateful, but for the equipment, before the customer's understanding is not much, so the customer put forward some questions to us: pellet machine pellets do not appear out of the situation how to do? In this regard, we have made the following answers.

1. too much humidity of raw materials: when the pellet mill is processing raw materials, too much humidity will lead to the outlet of the pellet mill being blocked.
2. Insufficient pressure in the pellet mill: Insufficient pressure in the pellet mill can also cause the pellets not to come out, which may be caused by the wear and tear or damage of the parts in the pellet mill.
3. wear and tear of the pellet mill shell: wear and tear of the pellet mill shell can cause the outlet to be blocked and pellets will not come out.
4. Wrong accessories of the pellet mill: If the accessories of the pellet mill are installed incorrectly or used improperly, it will also cause the pellets not to come out.

II. Treatment
1. Adjust the humidity of raw materials: according to the characteristics of different raw materials, drying treatment should be done to ensure that the humidity of raw materials meets the requirements of the pellet machine.
2. Check the pressure of the pellet mill: check the parts of the pellet mill, such as molds, rotors, etc. for wear or damage, and replace them in time if there is any problem.
3. Maintain the shell of the pellet mill: the shell of the pellet mill should be replaced in time as needed to make sure it is intact.
4. Check the accessories of the pellet mill: the accessories of the pellet mill should be installed correctly according to the instructions to ensure smooth use.