How To Solve The Biomass Fuel Pellet Mill Discharge Difficulty?

                     Firstly check the biomass fuel pellet machine ring module in biomass pellet machine manufacturer. If we use a new ring module. We need to consider whether the compression ratio of the ring mold is consistent with the raw material. If the compression ratio of the ring mold is too large, the raw material will have a high resistance to pass through the mold hole, and the biomass fuel pellets will be hard and have a low yield. If the compression ratio is too small, the pellets will not be formed and the biomass fuel pellet mill ring die must be re-selected.

                     If it is not these reasons, we will check the smoothness of the inner hole of the ring mold of biomass fuel pellet machine and whether the ring mold is not round. If we want to be cheap when choosing biomass fuel pellet mill, the ring die inner hole is rough and the ring die is not round, which leads to high discharge resistance, unsmooth pellets, difficult discharge, and low discharging. So it is recommended that we should keep our eyes peeled when buying biomass fuel pellet machine from biomass pellet machine manufacturers, and do not choose inferior biomass fuel pellet machine because we want to be cheap.