Fuel Pellet Machine Operation Regulations
1. Safe operation process
1. The installation of the fuel pellet machine must ensure that the equipment is stable, the cable wiring is correct, and the operating environment is well ventilated.
2. Before operation, the equipment should be checked to ensure that each component is in good working condition to avoid safety accidents caused by equipment failure.
3. Before operation, the equipment should be turned on for preheating, and the operation should be carried out after the equipment reaches the operating temperature.
4. During the operation, the specified operating procedures should be followed, and the operating parameters should not be changed at will or inappropriate raw materials should not be added.
5. Pay attention to the operating status of the equipment at all times to avoid abnormal situations. If a fault occurs, the machine should be stopped and checked in time.
2. Safety precautions
| Model | Capacity | Power | Dimensions |
| MK-250 | 100-200kg/h | 15kw | 1120*440*1060mm |
| MK-300 | 200-300kg/h | 22kw | 1280*560*1220mm |
| MK-350 | 300-400kg/h | 30kw | 1300*600*1250mm |
| MK-400 | 400-600kg/h | 37kw | 1390*650*1290mm |
| MK450 | 600-800kg/h | 45kw | 1620*700*1600mm |
1. The operator of the fuel pellet machine must receive professional training and understand the operating procedures and safety knowledge.
2. During the operation, it is strictly forbidden to smoke or bring flammable and explosive items into the operating area.
3. During the operation, it is strictly forbidden to put your hands into the fuel pellet machine or perform maintenance operations.
4. It is forbidden to wear loose clothing or long hair around the equipment that can be involved in the equipment.
5. Operators must pay attention to the temperature changes and working conditions of the equipment at all times, and clean and adjust them accordingly when necessary.
III. Daily maintenance
1. Regularly check the cables and wiring of the equipment to ensure that the circuit is normal and there is no leakage.
2. Regularly replace equipment parts and wearing parts to ensure the normal operation of the equipment.
3. When the equipment is not working, turn off the power supply, clean and disinfect the equipment, and ensure that the equipment is clean and hygienic.
4. Maintaining the normal operation and maintenance of the equipment can increase the service life of the equipment and prevent safety accidents and environmental pollution.
