Effectively Extend The Service Life Of Wood Chip Pellet Machine Skills

                  Do a good job of removing impurities and iron:Whether it is the production of pellet feed or the production of pellet fuel, the raw materials are often mixed with some impurities, such as sand, stones or iron. After these impurities enter the wood pellet machine, due to the strong extrusion stress and friction between them, they will make the parts wear out too fast, which not only reduces the formation rate of particles and increases the production cost, but also directly affects the productivity.

                 Therefore, the raw material must do a good job of removing iron and impurities. The iron removal device must be cleaned once per shift to avoid foreign matter from entering the straw pellet machine, causing the body to vibrate and crack. Avoid overload:Some users choose to replenish the material or run continuously for 24 hours in order to pursue higher productivity. Overloading will also aggravate the wear and tear of the bearings of the straw pellet machine. When the straw pellet machine is started, the feed amount increases from low speed to high speed, and the rotational speed is controlled. It is not allowed to run at high speed as soon as it is started, otherwise the straw pellet machine will be damaged or clogged due to sudden overloading.