Hanging Carbonization Furnace

Hanging Carbonization Furnace

Charcoal Carbonization stove

The hanging charring furnace adopts the advanced technology of recovering, purifying and circulating combustion of combustible gases, such as carbon monoxide, methane and oxygen, which are produced during the process of material charring. It fully achieves self-supply and self-sufficiency. The hoisted carbonization furnace is separated from the combustion chamber and adopts movable installation of carbonization liner, which can realize continuous work.

The lifting charcoal furnace includes furnace body, furnace cover, heating chamber and exhaust pipe, a charcoal liner is installed in the furnace chamber of the furnace body and a cover is installed on the charcoal liner, a downward-folded ring flange is fixed on the upper edge of the charcoal liner, and the downward-folded ring flange is installed with a matching buckle with a ring sealing ring fixed in the upper part of the inner part of the furnace chamber, and a lifting lugs are fixed on the sidewall of the charcoal liner, the sealing cap of the charcoal liner, and the furnace cover, respectively. Lifting lugs.

1,Open the cover of furnace body

2,Lift the furnace liner and place it in the charcoal loading area.

3,Open the cover of furnace gallbladder, put the gallbladder at an angle and load the rods.

4,After the charging is finished, close the cover of furnace gallbladder and lift the gallbladder into the furnace body.

5,Open the three smoke vents of the furnace body in turn, cover the gallbladder cover tightly, and spread some sand around the gallbladder cover for sealing, and start to proceed.

Hot Tags: hanging carbonization furnace, China hanging carbonization furnace manufacturers, suppliers, factory, horizontal carbonization furnace, Hanging Carbonization Furnace, wood chipper machine, Mobile Diesel Engine Wood Chipper, pto driven wood pellet mill, Punching Biomass Briquette Press