Analysis Of The Use Of Fuel Pellet Machine?

                       First add gear oil, according to the instructions heavy load gear oil. The rice husk pellet machine must be crushed when it is used for the second time. The holes are astringent and need oil lubrication. Grinding material is configured in the ratio of 5:2. Mix the bran and sawdust with the waste engine oil and set aside. Adjust the pressure roller screw and adjust it evenly until the roller cannot be turned by hand. 

                       Turn on the Rice Husk Pelletizer and recheck the rotation of each of the press wheels. If the press wheels are not touching the disk, adjust the screws again until the rollers are touching the disk, and then put the oil into the rice husk pelletizer one grain at a time. After normal discharge, increase the input and then repeat the operation. Grind for half an hour and put into normal production. Do not discard the abrasive, when it is expected to be unused for a long time after the work, press the abrasive into the machine so that it will not clog the holes when it is used next time.