Knowledge

Tips for fuel pellet machine?

                    Sawdust pellet machine choking machine, the reasons for this failure: compression ratio selection is too large, uneven feeding, speed is too fast, the material dry and wet is not stable, the pressure roller gap is loose, there are impurities in the material (such as iron, stone and large wood).


                    Troubleshooting: If you previously determine whether there is a change in the material under normal circumstances, you should adjust the mold compression ratio after replacing the material with a larger proportion of material. A sawdust pellet mill mold with too large a compression ratio can easily cause choking. If it is determined that the compression ratio is too large, replace the mold with a smaller compression ratio; check whether the feed material is uniform and whether the material layer is too thick, sometimes thick and sometimes thin, which will easily cause unstable current and eventually lead to choking. If so, the thickness of the material layer should be controlled with a plug-in board and the material layer should be thin.

biomass wood pellet machine

You Might Also Like

Send Inquiry