Knowledge

How to process rice husk into pellet fuel?

Biomass fuel pellet production line

 

Sawdust fuel pellet production line

 

Model Power Mold Hole Capacity for industrial solid Capacity for biomass Pellet size(mm)
MKYK-36 45kw 36 0.5-1.0 1.0-1.5 32*32*50-100
MKYK-48 75kw 48 1.0-1.5 1.5-2.5 32*32*50-100
MKYK-72 110kw 72 2.0-2.5 2.5-3.5 32*32*50-100
MKYK-90 132kw 90 2.0-2.5 3.5-5.0 32*32*50-100
MKYK-120 200kw 120 3.0-4.0 4.0-6.0 32*32*50-100
MKYK-150 250kw 150 4.0-6.0 6.0-10.0 32*32*50-100

 

 

1. Raw material pretreatment

First of all, sawdust, as a biomass raw material, needs to be screened. This is because the source of sawdust may be complicated, and it may be mixed with larger wood chips, wood blocks or other impurities. These impurities can be removed by screening to ensure that the particle size of the raw material is uniform, which is conducive to subsequent processing.

2. Feeding process

The pre-treated sawdust is delivered to the feed port of the biomass pellet machine. The pellet machine usually has a feeding device, which can control the feeding speed of the sawdust. This feeding speed is adjusted according to the production capacity and process requirements of the pellet machine to ensure stable and uniform feeding. With a screw feeder, it can accurately control the feeding amount of sawdust, so that the sawdust can enter the pressing chamber continuously and stably.

3. Pressing process

Pressure application: There are two key components in the pressing chamber of the biomass pellet machine, one is the pressing roller and the other is the ring die. When the sawdust enters the pressing chamber, the pressing roller rotates under the drive of the power device and squeezes the sawdust into the die hole of the ring die. There are many evenly distributed small holes on the ring die, and the size and shape of these small holes determine the size and shape of the final biomass pellets.

 

When the rollers press the sawdust and pass it through the die holes, strong friction will occur between the sawdust particles. This friction will increase the temperature of the sawdust, generally up to about 80-100℃. The lignin in the sawdust will soften under the action of high temperature and high pressure, acting as a binder to bond the sawdust particles together, thus forming biomass particles with a certain shape and strength.

4. Forming and discharging

When the sawdust is squeezed by the roller and passes through the ring die hole, biomass pellets are formed. These pellets are cut by the cutting device on the outside of the ring die to form pellets of equal length. Then, they are discharged through the discharge port of the pellet machine. The discharged biomass pellets generally need to be cooled because the temperature of the newly formed pellets is high. Direct storage may cause the pellets to deform or mold. The cooled biomass pellets can be packaged and stored for subsequent combustion, power generation and other purposes.

If you want to know more about process design, equipment layout, plant construction plan, single-machine equipment quotation, turnkey quotation and other information, please feel free to contact us.

 

Contact now

 

Factory equipment photos and certificates of honor

 

Rice husk fuel pellet production line

Factory equipment real shot

Sawdust fuel pellet production line

Factory equipment real shot

Automatic fuel pellet production line

Factory equipment real shot

certificates of honor

certificates of honor

certificates of honor

certificates of honor

certificates of honor

certificates of honor

You Might Also Like

Send Inquiry