How to adjust the ring die ratio of biomass pellet machine?
The main function of the ring die is to extrude the raw materials. The gap between it and the die plate can adjust the density of the material and the size of the particles within a certain range. The raw materials are extruded and formed. After the die plate rotates, a relative movement is formed between the material and the ring die, so that the raw materials are pressed into particles.
By extruding the materials with the ring die, we can effectively control the size, density and output of the particles. When the raw materials enter the ring die, the ring die extrudes the raw materials. During the extrusion process, the raw materials are pressed into a round cake with a certain diameter, and then the formed particle products are taken out from the ring die. This completes a series of work in the production process of the biomass fuel pellet machine.

| Model No. | Capacity(kg/h) | Power(kw) | Weight(t) |
| RKL-250 | 100-200 | 15 | 0.5 |
| RKL-300 | 150-250 | 22 | 0.65 |
| RKL-350 | 100-300 | 30 | 0.76 |
| RKL-400 | 300-600 | 37 | 2.2 |
| RKL-450 | 500-800 | 55 | 4.3 |
| RKL-550 | 1000-1500 | 90 | 5.5 |
When producing biomass pellets, the ring die ratio is a very important parameter. During the production process, the adjustment of the ring die ratio will directly affect the quality of the product, so the adjustment of the ring die ratio must be completed during the debugging of the biomass pellet machine.
1. Ensure that all components are installed correctly and tightened reliably.
2. Before adjustment, all bolts on the machine must be tightened once to prevent loosening.
3. After adjustment, rotate the adjustment screw on the roller clockwise to increase the gap between the ring dies; otherwise, it will decrease.
4. Feed slowly at the feed port to prevent the roller from suddenly accelerating and tearing the roller of the biomass pellet machine.
5. The roller should rotate smoothly and evenly, without any knocking or other abnormal sounds.
6. After installing the roller on the ring die, observe whether the gap between the ring die is uniform.

