How to maintain the biomass pellet machine on a daily basis?
In order to ensure the normal operation and service life of the biomass pellet machine, regular maintenance is required. The following will introduce the maintenance methods of the biomass pellet machine.
1. Regular inspection
Regular inspection of the biomass pellet machine is an important step in maintenance. The inspection content includes the operation of the machine, the wear of the parts, whether the electrical components are normal, etc. Once a problem is found, it should be dealt with in time to ensure the safety and reliability of the machine.
2. Lubrication and maintenance
The biomass pellet machine needs regular lubrication and maintenance to reduce part wear and keep the machine in good operation. According to the requirements of the machine manual, regularly replace the lubricating oil and grease to ensure that the machine is in good lubrication.
| Model No. | Capacity(kg/h) | Power(kw) | Weight(t) |
| RKL-250 | 100-200 | 15 | 0.5 |
| RKL-300 | 150-250 | 22 | 0.65 |
| RKL-350 | 100-300 | 30 | 0.76 |
| RKL-400 | 300-600 | 37 | 2.2 |
| RKL-450 | 500-800 | 55 | 4.3 |
| RKL-550 | 1000-1500 | 90 | 5.5 |
3. Cleaning and maintenance
The biomass pellet machine needs to be kept clean to avoid the influence of dust and debris on the machine. Clean and maintain the machine regularly, including cleaning dust and debris on the surface of the machine, cleaning the oil tank and oil filter, etc. At the same time, ensure the sealing and dustproofness of the machine to prevent dust and debris from entering the machine.
4. Tightening and maintenance
The biomass pellet machine will produce vibration and impact during operation, which may easily cause parts to loosen. Therefore, it is necessary to tighten and maintain the machine regularly. Check each part of the machine to ensure that there is no looseness, and tighten it if necessary.
5. Adjustment and maintenance
During the long-term use of the biomass pellet machine, the parameters of some parts may change, affecting the performance and accuracy of the machine. Therefore, it is necessary to adjust and maintain the machine regularly. Adjust each part of the machine to ensure the operation accuracy and performance of the machine.
