Knowledge

How does the sawdust pellet machine make pellets?

The sawdust pellet machine is mainly suitable for coarse fiber pelleting, such as wood chips, rice husks, cotton stalks, cottonseed skins, weeds and other crop straws, domestic garbage, waste plastics and factory waste, granulation, briquetting and rod making of materials with low bonding rate and difficult to form, and can also be used for low-temperature granulation of biological fertilizers, organic fertilizers, compound fertilizers, etc.

The real center of the sawdust pellet machine pelleting process is the wedge area between the roller nip point and the die. Almost all other equipment in the pelletizing process is auxiliary equipment to its most critical part. There are three pressure points:

 

sawdust pellet machine

 

Model Capacity Power Dimensions
MK-250 100-200kg/h 15kw 1120*440*1060mm
MK-300 200-300kg/h 22kw 1280*560*1220mm
MK-350 300-400kg/h 30kw 1300*600*1250mm
MK-400 400-600kg/h 37kw 1390*650*1290mm
MK450 600-800kg/h 45kw 1620*700*1600mm


1. The roller acting on the material squeezes the material into the die.
2. The die itself has a resistance that prevents the material from passing through the hole in the die.
3. The pressure applied by the roller is combined with the friction pressure generated by the material body. This pressure squeezes the material into the wedge area between the roller and the die, and prevents the material from being ejected along the surface of the die in front of the roller. As we increase the variable speed drive or control setting and increase the pellet mill feed rate, we increase the amount of material in front of the rollers in proportion. In other words, there is a greater force pushing the material into the nip point of the rollers, rather than dropping it into the die. This often results in blockage of the wood pellet mill die. This blockage forms in front of the rollers, hindering the rollers' ability to grind and push into the die holes. Therefore, distribution of the material across the die surface and into the nip point of the rollers is very important.

You Might Also Like

Send Inquiry