Biomass pellet machine press wheel adjustment tutorial.
Good pressure can make the pellet quality more stable and reduce the loss and fragmentation of pellets. Therefore, correctly adjusting the pressing wheel is one of the keys to ensure the stable and efficient operation of the pellet machine.
1. Adjust the wheel position
The pressing wheel in the biomass pellet machine generally consists of two wheels, which need to be adjusted to the appropriate position. Turn the wheels by adjusting the nuts so that they rotate and are properly compressed by the material. The adjusted position can make the pellet quality more stable and reduce the loss and fragmentation of pellets.
| Model No. | Capacity(kg/h) | Power(kw) | Weight(t) |
| RKL-250 | 100-200 | 15 | 0.5 |
| RKL-300 | 150-250 | 22 | 0.65 |
| RKL-350 | 100-300 | 30 | 0.76 |
| RKL-400 | 300-600 | 37 | 2.2 |
| RKL-450 | 500-800 | 55 | 4.3 |
| RKL-550 | 1000-1500 | 90 | 5.5 |
2. Adjust the pressure
After adjusting the position, you need to control the size and quality of the pellets by adjusting the pressure. Generally, the quality and size of the pellets are proportional to the pressure. By increasing or decreasing the pressure, you can adjust the pellet size and quality that suits your needs.
Precautions
1. When adjusting the pellet machine pressing wheel, you must ensure that the machine is in the off state and disconnect the power supply to avoid danger.
2. When adjusting the pressure, you should increase or decrease the pressure slowly, and do not make excessive adjustments in a short time to avoid damage to the machine.
3. When adjusting the pressure, pay attention to the particle output during the monitoring process. If there is a problem with the particle size or quality, stop adjusting in time.
4. After the operation, the machine should be cleaned in time to avoid foreign matter affecting the normal use of the machine.
