Briquette Making Equipment

The produced materials do not need to add any additives or binders during the processing. Straw and other materials contain a certain amount of cellulose and lignin. Lignin is the structural monomer in the material and a phenylpropane-type polymer compound. It can strengthen cell wall and bind cellulose. If the crop straw is burned or discarded directly, it will not only waste resources, but also pollute the environment. If it is pressed into blocks by a briquette machine, its burning effect will increase many times.

The pre-processed raw materials are fed into the feed port of the  briquette machine. Usually, the raw materials are transported to the working area of ​​the briquette machine through a feeding system.

In order to make the machine in good condition, the biomass briquette machine should be maintained regularly. There are several points that we should pay attention to during production.
Check up the electrical components in the electricity cabinet is well-connected, sensitive and reliable or not, to protect it from moisture and dust and to keep the cabinet clean. The biomass briquette machine should be maintained regularly according to the service condition. Examine the wearing condition of each part and the quick wearing parts should be repaired or replaced of. The bearing of each part should be cleaned and maintained regularly.