Biomass Fuel Briquetting Press Machine

The compression roller and the flat die are the main spare parts of the biomass briquette machine, and it is necessary to check up the clearance of the compression roller and the flat die are proper or not, the position is right or wrong, the fastening screws are tight or not, the lubricant oil is enough or not to ensure the normal operation of the biomass briquette machine. In order to prolong the service life of mold of biomass briquette machine, the die should be notices regularly, especially keeping the clearness of the inside of ring die. Don't use the hammer to unpack the machine to avoid of damage to the smoothness of machine's outer surface. 

The produced materials do not need to add any additives or binders during the processing. Straw and other materials contain a certain amount of cellulose and lignin. Lignin is the structural monomer in the material and a phenylpropane-type polymer compound. It can strengthen cell wall and bind cellulose. If the crop straw is burned or discarded directly, it will not only waste resources, but also pollute the environment. If it is pressed into blocks by a briquette machine, its burning effect will increase many times.