Bio Briquettes Manufacturing Machine

The working process of Biomass briquette machine is as follows: First, the straw or forage to be pressed is pre-processed, such as chopping or kneading, to ensure that the material length is less than 50mm and the moisture content is controlled within the ideal range of 10% to 25%. The material is then fed into the feed port of the machine by the feeding conveyor, and the rotation of the main shaft drives the pressing roller to rotate. Under the self-rotation of the pressing roller, the material is forced to be pressed in the mold hole of the ring die, forming a block and falling from the discharge port. After the briquette is naturally cooled (the moisture content must be controlled below 14%), it can be bagged and packaged.

The design of this biomass briquette making machine has significant features:

first, the operation of the equipment depends on the reducer driven by the electric motor, which drives the main shaft to rotate and then drives the pressing roller to work. The entire structure is simple and easy to maintain. Secondly, the radial gap between the pressing roller and the mold can be easily adjusted to ensure the optimal gap during the briquetting process and improve the quality of the briquette. Finally, the equipment is equipped with upper and lower electric heating rings, which heat the ring mold to help the material better shape, thereby improving production efficiency.