Wood Crusher User Guide
When choosing wood, pay attention to the hardness, humidity and size of the wood. Usually choose wood with low hardness, moderate humidity and suitable size for crushing.
Before using a wood crusher, you need to prepare the equipment. First, check whether the equipment is intact. If it is damaged, repair or replace it in time. Secondly, place the wood crusher on a flat ground and connect the power supply and discharge port.
Operation steps
1. Put the wood into the feed port: Put the selected wood into the feed port, and pay attention to the size of the wood put in.

| Model | MK06 | MK08 | MK06-18 | MK08-30 | MK08-40 |
| Drive System | PTO | PTO | Diesel Engine | Diesel Engine | Diesel Engine |
| (20-40HP) | (35-50HP) | (18HP) | (18HP) | (18HP) | |
| Max. Chipping Dia. | 6" | 8" | 6" | 8" | 8" |
| Flywheel Dia. | 24" | 26" | 24" | 26" | 26" |
| Feeding System | Mechanical Feeding (Standard) | ||||
| Hyfraulic Feeding,Adjustable Speed (Option) | |||||
| Chipper Knives | 2 | 2 | 2 | 2 | 2 |
2. Turn on the power: Turn on the power and start the wood crusher.
3. Adjust the crusher: Adjust the parameters of the crusher, including the speed and crushing time. Usually adjust according to the hardness and humidity of the wood.
4. Start crushing: Put the wood into the crusher from the feed port and start crushing. Pay attention to safety during operation and avoid touching the machine with your hands.
5. Turn off the power: After the crushing is completed, turn off the power and take the crushed wood out of the discharge port.

