Why Doesn't The Wood Pellet Machine Discharge?
1. The moisture content of raw materials is not appropriate. Too much or too little moisture cannot make pellets form, because pellet machine is made by physical pressing, without any chemical components added, and the adhesion is formed by appropriate moisture and pressure combination, so the moisture content of raw materials is one of the important factors.
| Model No. | Capacity(kg/h) | Power(kw) | Weight(t) |
| RKL-250 | 100-200 | 15 | 0.5 |
| RKL-300 | 150-250 | 22 | 0.65 |
| RKL-350 | 100-300 | 30 | 0.76 |
| RKL-400 | 300-600 | 37 | 2.2 |
| RKL-450 | 500-800 | 55 | 4.3 |
| RKL-550 | 1000-1500 | 90 | 5.5 |
2. The compression ratio of mold is not right; compression ratio and moisture are both equally important factors, one is controlled by raw materials, and the other is controlled by molds. Both ratios are indispensable. This compression ratio must be communicated with the merchant. One point of special attention is: for example, when pressing sawdust pellets some time ago, it was suddenly found that sawdust was not enough, and other miscellaneous wood was added. This will also seriously affect production! Because the compression ratio of different raw materials is different, if you have multiple raw materials, you should communicate with the merchant to prepare more molds.
3. The gap between the roller ring die is not adjusted properly. In the case of equipment testing, our company's technicians will teach customers how to use and debug to avoid no output. But the specific situation depends on your actual situation. Only by prescribing the right medicine can you get better and faster results.
