What Should I Do If The Biomass Pellet Machine Has Abnormal Noise?
The biomass pellet machine is divided into a flat die biomass pellet machine and a ring die biomass pellet machine. In use, we sometimes encounter abnormal noises in the pellet machine. When the equipment makes abnormal noises, it is likely to be a major equipment abnormality, which will cause inevitable damage to the equipment. Let's take a look at the possible causes of abnormal noises.
1: It may be due to the unstable transportation of biomass raw materials. Solution: You can adjust the feeding speed first and then observe.
2: The deflection scraper of the biomass wood chip pellet machine is worn, causing uneven feeding. Solution: A new scraper should be replaced.
| Model | Capacity | Power | Dimensions | Weight |
| MK-250 | 100-200kg/h | 15kw | 1120*440*1060mm | 400kg |
| MK-300 | 200-300kg/h | 22kw | 1280*560*1220mm | 700kg |
| MK-350 | 300-400kg/h | 30kw | 1300*600*1250mm | 800kg |
| MK-400 | 400-600kg/h | 37kw | 1390*650*1290mm | 1000kg |
| MK450 | 600-800kg/h | 45kw | 1620*700*1600mm | 1500kg |
3: The ring die and pressure roller of the biomass wood chip pellet machine are a combination of new and old. Solution: In actual production, it is best to choose a new ring die with a new pressure roller.
4: The gap between the pellet machine ring die and the roller is not coordinated with the material being produced. Solution: Adjust the roller gap in time.
5: The reason for the pellet machine roller is that the new and old rollers are used together or the rollers are worn and damaged. Solution: Replace the rollers.
6: The formula used in production is a type that is difficult to granulate. Solution: The formula can be adjusted appropriately to eliminate the impact.
