What Are The Important Links in The Production Of Charcoal Machine Equipment

There are four important links in the production of charcoal machine equipment, and as long as these four links are mastered, high-quality mechanism charcoal can be produced.
The first important thing is to crush the raw materials. During the crushing process, it is important to note that the raw materials must be crushed into small particles. The standard for small particles is between 5mm and 10mm. Only when this standard is met can the next step proceed. If it fails to meet the standard, it must be further crushed until it meets the standard.
The second important step is to dry the crushed raw materials. Only when the appropriate humidity is reached can good mechanism carbon be produced. The humidity standard is 8% to 12%. Only when this humidity is reached can rod making be carried out.
The third important step is rod making. During the rod making process, the temperature of the rod must reach 300 degrees or above. If the temperature is not reached, it is not easy to form, and if the temperature is too high, it is easy to become soft.
The fourth important step is carbonization. During the carbonization process, it must be sealed properly. If it is not sealed properly, carbonization cannot be done well. The carbonization time must also reach 8 to 12 hours to avoid incomplete carbonization.