What Are The Detailed Steps Of The Wood Pellet Machine?

Don't worry. It doesn't matter if you have never touched it or used it.
After getting the wood pellet machine in the factory or farm, don't rush to produce it. First check whether the layout or line is standardized. Then we will do the following:
1. Check before starting the machine
Before starting the machine, check whether the running direction of the wood pellet machine is consistent with the running direction of the pellet machine.

2. Break-in of the wood pellet machine mold
After the wood pellet machine is in hand, it cannot be produced directly, because the new machine needs to be broken in, so that the produced fuel can be more shiny.
3. Control the moisture content of the raw materials of the wood pellet machine
The raw materials used cannot be too dry and need to contain a certain amount of moisture. If the crude fiber content is high, it is better.
4. Adjust the length of the wood pellet machine pellets
If there is a need to adjust the length of the fuel pellets, you can adjust the chipper blade at the discharge port up and down, and the staff can adjust the length according to actual needs.
5. Feeding steps of wood pellet machine
When workers use wood pellet machine to add raw materials, they must remember not to put their hands into the feed port.